Parker派克 PDP系列接頭 測試端口和診斷設備快速接頭PDP361

 PDP  Series Nipples (diagnostic test port connectors) 6,000 psi, connect with PDP Series Couplers. These push to connect quick couplings provide easy connection for mechanical gauges or specialized diagnostic equipment including SensoControl meters and accessories. PDP Couplers allow test instruments, gauges, transducers, and flow sensors to be quickly and easily connected to system test points under full operating pressures up to 6000 psi.

PDP couplers and nipples push to connect, and then the coupler base is manually turned to open the nipple valve and complete the connection. When fully connected, the coupler base blocks the retracted sleeve to prevent accidental disconnects. PDP Nipples can be permanently mounted on equipment at critical test point locations, at threaded test ports, in rigid tubing or in hose assemblies. Couplers and nipples are available in 1/8"" size with a rated pressure of 6,000 psi.

Technical Characteristics: 
• Size: 1/8""
• Material: High tensile steel
• Port Ends: Male NPTF, Male UNF, Triple-Loc, Seal-Loc
• Seal Options: Nitrile, Ethylene Propylene, Fluorcarbon, Neoprene

Markets:
• Industrial 
• Construction
• Molding
• Testing
• Maintenance and Repair, MRO

Features/Benefits:
•  Steel nipples are machined from high tensile strength material to withstａnd continuous operating pressures up to 6000 psi 
• Nipple has a durable ball valve
• End fitting configurations include Triple-Lok and Seal-Lok options   
• Compatible with Parker's SensoControl diagnostic equipment
• Suitable for use with hydraulic or pneumatic systems

Applications: 
• equipment
• Cooling systems
• Industrial hydraulic systems
• Fluid or air system maintenance and troubleshooting
• System performance optimization
• System validation

PDP系列接頭（診斷測試端口連接器）為6,000 psi，與PDP系列耦合器連接。這些推動連接的快速接頭可輕松連接機械儀表或?qū)Ｓ迷\斷設備，包括SensoControl儀表和附件。PDP耦合器使測試儀器，儀表，傳感器和流量傳感器能夠在高達6000 psi的全操作壓力下快速輕松地連接至系統測試點。

按下PDP接和母頭進行連接，然后手動轉動接頭底座以打開奶嘴閥并完成連接。連接后，連接器基座會擋住縮回的套筒，以防止意外斷開。PDP接頭可以安裝在設備上的關鍵測試點位置，螺紋測試端口，硬管或軟管組件中。耦合器和奶嘴尺寸為1/8“”，額定壓力為6,000 psi。

技術特性：
•尺寸：1/8“” 
•材質：高強度鋼
•端口端：外螺紋NPTF，外螺紋UNF，三重定位，密封定位
•密封選項：腈，乙烯丙烯，碳氟化合物，氯丁橡膠

市場：
•工業
•建筑
•成型
•測試
•維護和維修，MRO

功能/優點：
•鋼接頭由高抗拉強度材料加工而成，可承受高達6000 psi的連續工作壓力
•接頭具有耐用的球閥
•末端接頭配置包括Triple-Lok和Seal-Lok選件   
•與Parker的SensoControl診斷設備兼容
•適用于液壓或氣動系統

應用：
•移動設備
•冷卻系統
•工業液壓系統
•流體或空氣系統維護和故障排除
•系統性能優化
•系統驗證